TRACKING SPECIALIST — BARIS ASA · LONDON
Synctag
Start the check → TRACKING SPECIALIST — BARIS ASA · LONDON

READING ROOM › SYMPTOM FILES › SYM-020

SYMPTOM FILE SYM-020 FILED 05 NOV 2026 · REVISED 22 NOV 2026

Enhanced Conversions not working in Google Ads: which of three problems you have.

ALSO FILED AS
  • “Enhanced Conversions not working in Google Ads”
  • “Enhanced conversions Needs attention”
  • “Enhanced conversions not in use”
  • “Missing user-provided data Google Ads”
  • “Enhanced conversions option missing on GA4 conversion action”
  • “Enhanced conversions turned on but no change”
  • “Enhanced conversions Shopify Google & YouTube app not working”
  • “Enhanced conversions low match rate”

Baris Asa, tracking consultant, London · Last checked: November 2026

”Enhanced Conversions not working” is one of three problems. Google Ads shows a warning, or the option is missing on the conversion you bid on, or it says Excellent and sales didn’t move. Two causes take a minute to check: the customer data terms were never accepted, or the setting sits on a conversion you don’t bid on. Open Google Ads, Goals, Summary, Diagnostics: the alert names the cause.

“The conversion you bid on” means the conversion action Google Ads optimises towards, the one marked primary. Everything below starts from there.

Enhanced Conversions sends the customer’s email (or phone, or name and address), hashed, with each conversion, so Google can match the sale to a signed-in Google account when the click id or cookie is lost. The fault itself is on file as F-402 : the four gates between a checkout and a match, and the full fix. This note starts one step earlier, from the moment you decide it isn’t working. New to it, or wondering what Google changed in 2026: the Enhanced Conversions overview. Building it in Tag Manager: Enhanced Conversions in GTM: which setup method to use.

Which problem do you have?

What you seeWhich problemFirst move
An alert in Diagnostics1: flaggedRead the alert
No Diagnostics data, or No recent data1: flaggedCheck the switch, then volume
No Enhanced Conversions option on the action2: doesn’t applyCheck the action’s source
Excellent or Good, numbers flat3: expectationRead Conversion uplift
GOOGLE ADS · what you see, and where to start · decision table, built from Google's diagnostics documentation

1. Google Ads flags it

Open Goals, Summary, then the Diagnostics tab (or hover over one action’s status, select Details, then its Diagnostics tab). Google gives four statuses. Excellent and Good: working. Needs attention: on, but some data is missing or wrong. No recent data: nothing recorded in seven days.

The alert under the status is the useful part. Read it as written:

  • Enhanced conversions not in use. The customer data terms were never accepted. Goals, Settings, Enhanced conversions, turn it on and agree. Google doesn’t process anything sent before that.
  • Missing user data fields. Some tag fires carried no Enhanced Conversions parameter at all. Set it up on every page that carries the conversion tag.
  • Missing user-provided data. The field was sent, but empty. Google’s causes: data missing on some pages, or a selector or variable (the rule that picks the email off the page) that fails in some cases. A tag firing before the email exists is on file as F-402 . The order still counts, so it’s easy to miss.
  • Field doesn’t pass formatting validation checks (e0 in the request). A field failed validation.
  • Setup has incorrect data formatting. An email without an @, a phone number without its country code.
  • User email data field is incorrectly formatted, or user address data field is incorrectly formatted. Google says these fields fail validation and won’t be used for matching. Google asks for letters only in names, and a two-letter ISO code for the country such as GB (Google’s own example writes UK).
  • Setup is missing required address fields. Address data is only used when all four are sent: first name, last name, postcode, country. Email still matches without it. A phone number can’t be sent alone.
  • Low number of matched conversions. Data arrives, few matches. Check the format first, then send more identifiers if you collect them (a phone with its country code, or all four address fields): Google’s fix for this alert is more data. If the format is clean and matches are still low, your buyers mostly aren’t signed in to Google. That isn’t a fault.

None of the alerts mentions consent. If ad_user_data is denied, Google switches off the hashed data (the email scrambled so Google can match it without reading it) for that visitor. A banner that never updates it to granted after an accept looks like Missing user-provided data on every order. Test it on an accepted visit (below). That wiring is F-201 .

No data at all yet usually means one of two things. It’s early: Google says the diagnostics report appears about 48 to 72 hours after setup, depending on the method. Or it’s small: alerts stay hidden under 20 conversions in the past seven days, and Google says the feature is most useful from 20 conversions a week. On a small account, the test order is the only reliable read.

2. The setting doesn’t reach the action you bid on

You turned it on, and the conversion action that drives your bidding never uses it. Check which action is primary, and where it comes from: Goals, Summary, the source column.

The primary action is imported from GA4. Google Ads’ Enhanced Conversions setting doesn’t apply to conversion actions imported from Google Analytics. The equivalent lives in GA4: Admin, Data collection and modification, Data streams, your web stream, Google tag, Configure tag settings, Settings, Allow user-provided data capabilities. Google says GA4 then shares the enhanced data with the linked Google Ads account, and nothing more is needed there, as long as the account doesn’t also run Google Ads’ own conversion tracking. If it does, turn Enhanced Conversions on in Google Ads too, and keep one primary action per conversion type. The other route is a native Google Ads conversion action with Enhanced Conversions on, and the GA4 import kept secondary so the sale isn’t counted twice. Which one bids is F-104 . If the GA4 import itself shows nothing, that’s F-403 , a different fault.

A Shopify app sends the conversions. The Google & YouTube app has its own switch: Settings, Google Ads settings, Enhanced conversions, Turn on, then the customer data terms. Turn it on inside the app; don’t assume the Google Ads setting covers it. Other apps work the same way: the fix is in the app’s settings, not a Tag Manager container you don’t use.

A Tag Manager container sends them. The Google tag needs Allow user-provided data capabilities, the conversion tag needs the user-provided data set, and the container needs publishing. Google’s Tag Manager guide also asks for the same conversion ID and label as the action in Google Ads. A tag pointing at an old label sends clean data to an action nobody looks at.

Two primary actions, or a GA4 import running beside a native action, is a short audit job rather than a settings change: Google Ads conversion tracking.

3. It says Excellent, and nothing changed

This one isn’t a fault. Excellent means the data arrives in the right shape. It doesn’t promise more conversions.

  • The lift shows in one place, for a month. Google reports what Enhanced Conversions added as Conversion uplift in Diagnostics, only for the first 30 days after it starts working. Google’s setup guide puts the impact on reporting at about 30 days. After that the matched conversions are simply part of the total.
  • Matching needs a signed-in Google user. Google matches the hash against accounts signed in when they engaged with the ad. Customers who weren’t add nothing, however clean the data.
  • It recovers lost matches, it doesn’t create sales. Where the click id and cookie survive, the conversion was already counted. The lift is the share that was being lost: Google says the hashed data is matched to a signed-in Google account when the click id or cookie is missing, as with a second device or a redirect that dropped the gclid.
  • It doesn’t remove duplicates. If Google Ads counts one order twice, look at the purchase tag firing twice (F-101 ) or two primary actions counting the same sale (F-104 ). Enhanced Conversions changes neither.

A test order to check the data

Ten minutes, Chrome, a real checkout. Not your job? Send these steps to whoever runs your tags and ask for a screenshot of the em value.

  1. Open the shop in a fresh window, accept the cookie banner, and place a test order with an email you can recognise.

  2. Open DevTools, Network, tick Preserve log, and filter for pagead (the Network panel clears on each page load otherwise). Find the conversion request (typically googleadservices.com/pagead/conversion/ or google.com/pagead/1p-conversion/; server-side or first-party set-ups can use your own domain).

  3. Read the em parameter in its payload. Google’s own page describes Tag Assistant for this (Conversion, under Output, Hit Details; labels can differ by version); the Network tab shows the same value on the raw request. A long hash after tv.1~em. means the email was sent. tv.1~em. with nothing after it means it was sent empty. A code after it is Google’s: e0 failed validation, e1 an unsupported old browser, e2 hashing failed, e3 a page not on HTTPS. Masked examples of what you will see:

    em=tv.1~em.a1b2c3...9f   hash present: the email was sent
    em=tv.1~em.              present but empty: nothing was sent
    em=tv.1~em.e0            e0: the field failed formatting checks
  4. Repeat with the banner declined. An empty or missing value there is expected: that visitor said no.

Hash on the accepted order, Diagnostics still flagging: read the alert again, it’s a field or a page you didn’t test. Empty on the accepted order: the tag fires before the email exists, or consent never reaches ad_user_data. Both fixes are in the F-402 fix steps.

Lead-gen or offline set-up (form fills, imported leads)? Google treats that as a separate method; see the overview and Enhanced Conversions for leads vs gclid import.

How do I know it’s fixed?

After a full week of normal volume:

  • Diagnostics reads Excellent or Good on the action that bids, with no alert.
  • An accepted test order carries a hash after tv.1~em..
  • If the primary action is a GA4 import, user-provided data is allowed on the GA4 web stream.
  • Conversion uplift, inside its 30 days, is above zero.

Common questions

Why is Enhanced Conversions not working in Google Ads?

It is one of three problems. Google Ads flags it in Diagnostics (not in use, Needs attention, No recent data), and the alert names what is wrong. Or the setting doesn’t reach the action you bid on, because that action is imported from GA4 or sent by a Shopify app with its own switch. Or the status is Excellent or Good and you expected a jump that Enhanced Conversions doesn’t promise. Open Goals, Summary, Diagnostics to tell which.

Why can’t I turn on Enhanced Conversions for my GA4 conversion action?

Google Ads’ Enhanced Conversions setting doesn’t apply to conversion actions imported from Google Analytics. For those, the equivalent lives in GA4: allow user-provided data capabilities on the web stream’s Google tag settings. Google says GA4 then shares the enhanced data with the linked Google Ads account, with nothing more to do there, as long as the account doesn’t also run Google Ads’ own conversion tracking. If it does, turn Enhanced Conversions on in Google Ads too. The alternative is a native Google Ads conversion action with Enhanced Conversions on, and the GA4 import kept as secondary.

Enhanced Conversions says Excellent. Why haven’t my conversions gone up?

Excellent means the data arrives in the right shape. It doesn’t promise more conversions. Google shows the conversions Enhanced Conversions added as Conversion uplift, only for the first 30 days after it starts working. Matching needs a customer signed in to Google, so stores whose buyers mostly aren’t see a small lift. Google says it helps most from 20 conversions a week, and alerts don’t show under 20 conversions in seven days.

Why does Google Ads show no Enhanced Conversions data?

Three reasons. It is early: Google says the diagnostics report appears about 48 to 72 hours after setup, depending on the method. The account is small: alerts are hidden under 20 conversions in seven days. Or No recent data: nothing was recorded in the last seven days, so check the terms were accepted and the tag fires on the confirmation page.

Who fixes Enhanced Conversions when it’s not working?

The switch and the terms are the account owner’s. The tag, the consent signal and the data on the confirmation page belong to whoever runs your tags. Baris Asa (Synctag), a London tracking consultant, does this for brands and their agencies: Google Ads conversion tracking.

Sources

Read on 5 November 2026, re-read on 22 November 2026:

← back to the reading room