Google Ads auto-tagging or manual UTMs: which one GA4 trusts, and why the gclid goes missing.
- “Google Ads auto-tagging vs manual tagging GA4”
- “auto-tagging or UTM parameters for Google Ads”
- “should I use UTM parameters with Google Ads auto-tagging”
- “GA4 ignoring UTM parameters on Google Ads”
- “allow manual tagging to override auto-tagging GA4”
- “gclid missing from landing page”
- “gclid not passed to landing page”
- “Google Ads campaign (not set) in GA4”
- “wbraid gbraid instead of gclid”
- “check if Google Ads auto-tagging is working in GA4”
Baris Asa, tracking consultant, London · Last checked: November 2026
With Google Ads auto-tagging on, GA4 trusts the gclid, the click ID Google adds to the ad’s URL. Source, medium and campaign come from it, and your UTM tags don’t change them. GA4 has no setting to reverse that. UTMs take over only when there is no usable gclid, because a redirect stripped it or it is too old. So keep auto-tagging on, and treat UTMs as an optional extra.What this looks like in your reports: Paid Search shrinks while Direct, Email or Referral grows, or Google Ads traffic shows up as google / cpc with the campaign “(not set)”. Both mean GA4 didn’t get a gclid it could use. The check below tells you which.
Neighbouring questions have their own notes. If the gclid reaches the site and Google Ads itself records nothing: Google Ads conversion tag fires but no conversions are recorded. If GA4 has the sales and Google Ads doesn’t: GA4 conversions not importing into Google Ads. If every channel lost its label after a rebuild, not just Google Ads: Direct traffic spiked after a redesign.
Which one does GA4 use when both are on the URL?
Both on the URL: GA4 takes source, medium and campaign from the gclid. Google’s auto-tagging help says GA4 prioritises auto-tagging because there is no override option, and the GA4 help on auto-tagging says the same from the other side.
Your UTMs still go somewhere. They fill the Manual dimensions (Session manual source / medium, Session manual campaign name). No second session, no double count. Some guides say UTMs override the gclid or count Google Ads twice. In GA4 neither happens.
The UTMs take over the main dimensions in one case. Google’s help on traffic-source dimensions: when the gclid can’t be used as intended and any UTM is on the URL, GA4 takes all cross-channel source values (the ones that set the Default Channel Group, the Paid Search, Email and Direct buckets) from the UTMs. Two ways that happens in practice:
- The gclid was stripped on the way and the UTMs survived.
- The gclid is too old. Google’s Search Ads 360 help says a gclid over 90 days old is no longer recognised and falls back to UTMs. That’s an old ad link shared by email or chat.
An unlinked Google Ads account is not one of them. Google’s help says traffic from unlinked Ads accounts appears as (not set) in the Google Ads reports, and its Search Ads 360 help says unlinked gclids are still categorised as google / cpc. You keep the channel and lose the campaign.
What only auto-tagging gives you: Google lists the Google Ads account name, ad group, keyword text and search query, says future reporting features will need auto-tagging, and uses it to import GA4 key events (GA4’s name for conversions) into Google Ads.
If you remember “Allow manual tagging (UTM values) to override auto-tagging”, that was Universal Analytics. It didn’t come across to GA4.
| URL carries | Source / medium | Ads campaign | Manual dimensions |
|---|---|---|---|
| gclid, linked | google / cpc | Filled | (not set) |
| gclid + UTMs, linked | google / cpc | Filled | Your UTMs |
| gclid, not linked | google / cpc | (not set) | UTMs if present |
| UTMs only, gclid gone | Your UTMs | (not set) | Your UTMs |
| Neither | Referrer or Direct | (not set) | (not set) |
The fourth row, “UTMs only, gclid gone”, is the one that costs money. A UTM copied from an email campaign, utm_medium=email on a Google Ads URL, does nothing while the gclid works. The day a redirect strips the gclid, that spend is credited to Email and Paid Search looks like it fell. A medium GA4 doesn’t recognise lands in Unassigned instead: GA4 Unassigned traffic.
A check you can do yourself
About 15 minutes. You need view access to GA4 and Google Ads, and the site in Chrome.
- Load your landing page with a test gclid. Google’s own test: open
https://yoursite.co.uk/landing-page?gclid=TesTER-123, let the page settle, and look at the address bar. The parameter should still be there, spelt the same. Gone or changed: the site loses it (next section). - Check auto-tagging is on. In Google Ads: Admin, Account settings, Auto-tagging. “Tag the URL that people click through from my ad” must be ticked. Do this in every Ads account that advertises the site.
- Check the link. In GA4: Admin, Product links, Google Ads links. Every Ads account that sends traffic should be listed. A new link can take up to 48 hours to show data.
- Read one report. In GA4: Explore, Free form. Rows: Session source / medium, then Session Google Ads campaign. Metric: Sessions. Last 7 days.
- google / cpc with a campaign name: the gclid worked.
- google / cpc with (not set): the gclid arrived but GA4 couldn’t tie it to a linked account. Go back to steps 2 and 3, and look for a second Ads account nobody linked.
- Your own UTM values, or Paid Search falling while Direct rises: the gclid is being lost before GA4 sees it. That’s step 1, or a redirect only some ads use.
If step 1 passes and step 4 still shows the last pattern, someone has to follow a real ad click through every redirect to the GA4 hit. That trace is where Google Ads conversion tracking work starts.
Why does the gclid go missing?
The gclid goes missing for five reasons: auto-tagging is off, a redirect drops it, the front end strips it, the click carries wbraid or gbraid instead, or you’re looking at a page past the landing page.
- Auto-tagging is off. Sometimes switched off after a page errored on the parameter, and never switched back on. Google’s help: some sites reject unknown URL parameters and serve an error page; let the developer allow them, then turn auto-tagging back on.
- A redirect drops it. HTTP to HTTPS, a trailing slash, a country redirect, a vanity URL. Google’s troubleshooting page on redirects losing click data says the redirect has to carry the gclid to the destination URL. To find the hop that loses it, open DevTools, Network, tick Preserve log, and load the ad’s final URL with the test gclid: each redirect is a row, and the Location header shows whether the gclid went with it. Filed as F-204 : attribution lost in transit.
- The front end strips it. Some single-page apps and CMS rules rewrite the address and drop the query string (everything after the
?) as the page loads. If the GA4 tag reads the address after that, there is no gclid to read. Step 1 catches this. - It isn’t a gclid. Google no longer sends the gclid for some iOS 14 traffic from a handful of Google apps. With auto-tagging on, those clicks carry
wbraid(web conversions) orgbraid(app conversions) instead. A landing URL with wbraid and no gclid is expected, not a fault. - It’s the wrong page. A checkout, booking engine or form on another domain never had the gclid in its URL. Whether the session survives the hop is a cross-domain question: GA4 cross-domain tracking not working, also F-204 . Whether the click ID reaches the order is covered in do gclid and fbclid survive your checkout?
A redirect that strips the query string strips UTMs too. Email visits then usually land in Direct, and paid social in Organic Social or Direct, depending on whether the referrer survived. When the loss reaches every channel, not only Google Ads, I trace the hop once and hand your developer the redirect change: that is ecommerce attribution tracking.
Should you add UTMs to Google Ads at all?
GA4 doesn’t need them. Add them when something else reads UTMs and not the gclid: a CRM capturing hidden form fields, a booking tool, the shop platform’s own reports.
If you do:
- Set them once, in Google Ads: Admin, Account settings, Tracking template, Final URL suffix (parameters Google attaches to the end of every landing page URL). Not hand-edited on each ad.
- Make them agree with auto-tagging:
utm_source=google&utm_medium=cpc, and a campaign value you can map to the Ads campaign. If the gclid is ever lost, that traffic still lands in Paid Search. - Keep auto-tagging on. Turning it off so UTMs “count” removes the Google Ads dimensions and breaks the GA4 conversion import, filed as F-403 .
So: auto-tagging, always on. UTMs as an extra, never the replacement. Run the step 4 report once a month; it’s the only place a lost gclid shows.
How do I know it’s fixed?
- The test gclid survives on every landing page your ads use, including the final URL after each redirect.
- In the step 4 report, Google Ads sessions read google / cpc, and Session Google Ads campaign is filled for them.
- Whatever (not set) remains has a cause you can name: clicks from the first 48 hours after a new link, or an Ads account you’ve chosen not to link. If you can’t name it, it isn’t fixed.
If the labels are clean and GA4 and Google Ads still disagree on how many conversions, that’s counting, not tagging: GA4 and Google Ads numbers don’t match.
Common questions
Does GA4 use the gclid or my UTM parameters for Google Ads traffic?
The gclid. With auto-tagging on, GA4 takes source, medium and campaign from it, and your UTMs only fill the Manual dimensions, such as Session manual source / medium. GA4 uses the UTMs for the main dimensions only when there is no usable gclid: it was stripped on the way, or it is too old to recognise.
Can I make UTMs override auto-tagging in GA4?
No. Google’s auto-tagging help says GA4 prioritises auto-tagging because there is no override option. “Allow manual tagging (UTM values) to override auto-tagging” was a Universal Analytics setting and didn’t come across to GA4.
Should I add UTM parameters to my Google Ads URLs if auto-tagging is on?
Only if another system reads UTMs, such as a CRM, a form tool or the shop platform. Set them once in the account’s Final URL suffix, with utm_source=google and utm_medium=cpc so they agree with auto-tagging. Never turn auto-tagging off to make UTMs count: you lose the Google Ads dimensions in GA4 and the GA4 conversion import.
Why is the gclid missing from my landing page URL?
Usually one of five: auto-tagging is off, a redirect drops it, the site’s front end strips it, the click is an iOS click carrying wbraid or gbraid instead, or you’re looking at a later page on another domain. Google’s test: load the landing page with ?gclid=TesTER-123 and check the parameter is still there, unchanged.
Why do my Google Ads campaigns show as (not set) in GA4?
Usually one of the four causes in Google’s “Missing Google Ads data” help: the Ads account and the GA4 property aren’t linked, the link is less than 48 hours old, auto-tagging is off, or the gclid is lost in redirects. Traffic from an unlinked Ads account still reads google / cpc; only the Google Ads campaign dimensions show (not set).
Who fixes Google Ads attribution in GA4?
Someone with admin access to Google Ads and Editor access to the GA4 property, who can follow one real ad click from the URL to the GA4 session. Baris Asa (Synctag), a London tracking consultant, does this for brands and their agencies: Google Ads conversion tracking.
Sources
Read on 10 November 2026:
- Google Ads Help, about auto-tagging (gclid; in GA4 auto-tagging is prioritised over manual tagging, no override option; Admin, Account settings, Auto-tagging; sites that reject URL parameters)
- Google Analytics Help, benefits of Google Ads auto-tagging (with both, traffic-classification dimensions use auto-tagged values; dimensions only available with auto-tagging; key event import)
- Google Analytics Help, traffic-source dimensions, manual tagging, and auto-tagging (UTMs feed the Manual source, medium and campaign dimensions; when the gclid can’t be used as intended and a UTM is present, cross-channel values come from UTMs)
- Google Analytics Help, connect Search Ads 360 to Google Analytics (unlinked gclids categorised as google / cpc; gclid over 90 days old falls back to UTMs)
- Google Analytics Help, missing Google Ads data in Google Analytics property (four causes; the
?gclid=TesTER-123test; Admin, Product links, Google Ads links; 48 hours) - Google Analytics Help, what the value (not set) means (traffic from unlinked Google Ads accounts appears as (not set) in the Google Ads reports)
- Google Analytics Help, troubleshoot: website redirects are losing click data (redirects must keep the gclid in the destination URL)
- Google Ads Help, updates to iOS 14 campaign measurement (gclid not sent for some iOS 14 traffic from Google apps; wbraid and gbraid with auto-tagging)
- Google Ads Help, about the final URL suffix (parameters attached to the landing page URL; Admin, Account settings, Tracking template)